Guidelines for Canon IP110 Setup, Wireless & Bluetooth Setup

Canon Inc. is a Japanese multinational industry globally famous for manufacturing imaging devices like cameras, printers, medical types of equipment, image scanners, MRI and other diagnostic systems, and various high-resolution imaging components. Canon IP110 is a light-weighted and small printer that provides high-quality printouts. You can also print photos with this printer that makes it more preferable for home-users. If provides you wireless printing features where you can easily take printouts from your various devices.

Un-boxing your Canon IP110 Wi-Fi printer

  • Place your printer packages on a plane surface and remove the upper seal carefully
  • Check for the ink cartridges, power cords, CD-ROM, USB, and other parts.
  • Now take out your printer and place it in a clean, plane, and, dry surface.
  • Plug-in one side of power code to the printer and another one to the power supply
  • Fit the ink cartridges into the printer carefully.
  • Push the input tray to fill it with the required amount of paper.
  • Now you have to download and install the printer driver for completing the configuration.

How to download Canon IP110 Driver?

The printer driver can be defined as a medium that talks between your printer and the device. You can’t take printouts until you install printer drivers on your system. Follow the mentioned steps for downloading printer drivers on your device.

  1. If you have a CD-drive on your device then you can copy and install the driver from the provided CD.
  2. Insert the Canon IP110 setup CD on your device’s disk drive.
  • A setup window will appear on your screen
  1. Click on the setup
  2. Follow the on-screen commands
  3. Click on the finish button
  • Now try to take the print from your printer
  • If you don’t have a CD-drive on your device then you can download the Canon IP110 printer driver from the internet
  1. After downloading the setup; run the installation and follow the on-screen commands for completing the Canon IP110 setup installation process.

How to Connect Canon Pixma IP110 Printer to Wi-Fi?

  1. Download and install the compatible printer driver on your device.
  2. User Account Control box pop-up will appear on the screen
  • Hit the Yes button
  1. Click on Next button
  2. Connection option page will appear on your screen
  3. Click on Wireless LAN connection
  • Click on Access Point Connection
  • Printers and network list will appear on the screen
  1. Click on printer could not be found the option
  2. Click on wireless setup on setup procedure page
  3. Now follow all the on-screen commands for connecting Canon IP110 to Wi-Fi.

Guidelines for Canon Pixma IP110 Bluetooth Setup

For configuring Bluetooth setup; your device must have a printer driver installed in it and should meet will all the specifications.

  1. Turn off your Canon printer and wait until the light stops glowing.
  2. Now detach your printer’s cap and connect the Bluetooth unit.
  • Turn on Canon printer
  1. Start the Canon Utility program
  2. Go to start menu
  3. Click on All Programs
  • Go to Bluetooth setting tab
  • Click on Change
  1. Enter the passkey
  2. Ensure that the device name is correct
  3. Register Canon IP110 as for Bluetooth device from Devices and Printers.

How to Connect Canon Printer to Phone?

Canon IP100 printer is compatible with mobile devices. You can directly take printouts with the help of Bluetooth or USB. In case you have an iOS device; you can take a printout with the help of the AirPrint setup.

How to set a password on the Canon Pixma IP110 printer?

Your admin password will be different from the printer model

By default printer name is “ADMIN” and password Canon is “canon”

  1. Go to operational panel
  2. Open IJ Network Tool device setup utility
  • A password window will appear on the screen
  1. Create a strong password for your Canon Printer

Canon IP110 Reset Guidelines

The printer reset option brings your printer to its default stage. All your specifications will get removed. Follow the steps given below for resetting you Canon IP110 printer:

  1. Press the Cancel button
  2. Press the cancel button until the power lamp glows
  • Release the button when the lamp blinks for nine times
  1. Now your printer device has been reset

Troubleshooting Canon Pixma IP110 printer issues:

I am getting faded printouts

There can be many reasons for getting fade printouts. One of the most common reasons for fade printing is the low ink level. Check the ink level of your cartridges. If the ink is near to the minimum level then you should change the ink cartridges. You can also refill your ink cartridges because new ink cartridges are costly. But make sure you are refilling your ink cartridges under proper guidance. If the cartridge lid doesn’t fit properly then the ink may spill out and damage your printer. Printing quality can also decrease when you are using third-party cartridges. Always use genuine cartridges on your printer. Check the quality setup. Change the quality setup to high.

My printer is running slowly.

Canon printers are known for good printing speed. If your printer is running slowly then you should ask for technical help. The low power supply can also lead to a slow printing rate. Using your printer on drift mode can help you for taking printouts at a good speed. In drift mode, the quality of your printout gets reduced but the speed increased.

My printer is facing a paper jam.

Paper jam error occurs when a chunk of paper gets stuck inside the printer or when the paper rollers draw two or more papers simultaneously. Clean your printer and remove all the junk. Check the paper tray and try again.

If you are getting any kind of queries while configuring or using the Canon printer; contact Canon support for help.

Steps to Canon iP110 wireless setup

Canon iP110 is a famous printer which is mostly used for home use. Canon printer provides wireless accessibility so the user can easily take the printouts from any device and anywhere. Before setting the Canon printer, make sure you have a Canon printer driver for the smooth printing operation. Pixma iP110 setup is very simple so anyone can install and use the printer reliably.

Canon iP110 setup for Windows 7 device

If you have bought a new printer then you will receive the printer driver CD along with the printer. If you have a CD drive then insert the CD on the drive and wait until a setup wizard appears on the screen. Now click on the setup and follow the on-screen commands for completing the driver installation. If your device doesn’t have a CD drive then you need to install the setup from the internet. Visit Canon website and search for the driver of your printer model. Download the setup and follow the on-screen instructions for proper installation.

Setup Canon iP110 for Mac device

You will get the Canon Pixma driver with your printer for easy installation. New Mac devices don’t have a disc drive so you need to install the setup from the internet. Open the web browser and search for the related setup. Download and install the setup on your Mac device. If you have an old Mac device then you can insert the CD on the disc drive; copy and paste the driver. After installing the setup, you can easily connect the printer to the PC and take the printout.

Steps to connect Canon iP110 to Wifi

Canon printer provides connectivity via Wifi when your router has a physical WPS pin. Connecting the printer via WiFi helps to take the print from any device easily. Follow the mentioned steps connecting Canon printer to Wifi:

  1. Make sure your Canon iP100 is turned on
  2. Check the printer input tray. The pages should be aligned properly. 
  3. Check the router to ensure that your router supports WPS
  4. Now press the Wi-Fi button on printer’s control panel
  5. Wait for some time
  6. Press the WPS button on your router

Follow the on-screen commands for completing the setup. Once complete the setup, open a document on the PC and press Ctrl and P button. A print wizard will be displayed. Adjust the setting according to your requirements and click on the print button. If you want to take printouts from a PC or smartphone then you can go for Canon ip110 Bluetooth setup and take the printouts easily.

Canon iP110 AirPrint Setup

Canon printer also provides an AirPrint feature to take printouts from iOS devices. Once you set up the AirPrint then you can take printouts with iDevices without a USB cable. Follow the mentioned steps for AirPrint setup:

  1. Turn on your Canon Pixma iP110 printer and connect it to the same network in which your iDevice is connected
  2. Open the document on your iOS device
  3. Click on the Share icon
  4. Drop down to the print option
  5. A print screen will appear
  6. Choose your printer name

Adjust the settings and hit the Print option. If you are facing any error while printing with iDevice then contact Canon iP110 troubleshooting team and get reliable help.

Steps for Canon iP110 reset

Resetting the Canon printer will clear all the settings and make your printer as default. People often reset the printer when they face any kind of error or they are connecting the Canon printer to a new device. Here are the steps for resetting the Canon iP110 printer:

  1. Press the power button of your Canon printer
  2. Go to the touch menu
  3. Click on arrow keys and navigate to the setup menu
  4. Go to Device settings
  5. Hit the OK button
  6. Click on Reset Settings
  7. Tap the OK button
  8. Choose a Factory reset option
  9. A confirmation window will appear
  10. Click on Confirm button

Once you reset the Canon printer, make the settings according to your requirements and take quality printouts easily.

Related Posts:

How to Troubleshoot Pixma MX922 Error Code B200?

Canon Printer LBP6230DW Wireless Setup Manual

Guidelines for Canon Pixma MG3000 Printer Wireless Setup

How to configure Canon Pixma MG2522 wireless setup?

How to fix the Canon Pixma MX922 won’t print error?

Absolutely Free

Customer Support Services

Call USA/CA +1-888-984-5840

Call UK +0-808-280-3057